Finding The Best Whole House Water Filtration System

There are a lot of different whole house water filtration systems on the market, and it can be tough to know which one is right for you. The best way to find the perfect system for your home is to figure out what your specific needs are and then find a system that meets those needs. To help you get started, we’ve compiled a list of the most important factors to consider when shopping for a whole house water filtration system.

Water quality is an important factor to consider when choosing a filtration system. If you live in an area with hard water, you’ll want to make sure that the system you choose can handle that. You should also consider the size of your home when selecting a system. A smaller home will need a less powerful system than a larger home.

What Is a Whole House Water Filtration System?

A whole house water filtration system is a system that filters all of the water that comes into your home. This means that every time you turn on the faucet, shower, or use any other water source in your home, the water will be filtered. Whole house systems are usually installed at the main water line coming into your home so that all of the water is filtered before it even gets to your pipes.

There are a lot of different whole house water filtration systems on the market, and it can be tough to know which one is right for you. The best way to find the perfect system for your home is to figure out what your specific needs are.

For example, Springwell whole house water filter uses catalytic carbon and certified KDF media to target and remove harmful contaminants like chlorine, chloramine, PFOA, PFAS PFOS. While other filtration systems like Ispring use cartridge filtration that filters 95-percent of chlorine, heavy metals, VOCs and other chemical contaminants.

So how do you decide? You need to have your water tested.

Why You Need To Test Your Drinking Water

The Environmental Protection Agency (EPA) regulates the quality of drinking water in the United States. However, they only require water utilities to test for a limited number of contaminants. This means that there could be other harmful contaminants in your water that are not being tested for.

The best way to know what’s in your water is to have it tested by a certified lab. Once you know what’s in your water, you can choose a filtration system that will remove those contaminants.

What Types Of Whole House Filtration Systems Are there?

After you have completed a water quality test, you have two main types of whole house water filtration systems to consider: point-of-entry (POE) and point-of-use (POU).

Point-of-Entry (POE) Systems

POE systems filter the water before it enters your home. This means that all of the water in your home will be filtered, even if you have multiple water sources. POE systems are typically installed near the main water line coming into your home.

Point-of-Use (POU) Systems

POU systems filter the water at a specific location in your home. This means that you will need to install a POU system at each individual water source. POU systems are typically installed under the sink or at the point-of-use, such as a shower head.

Which Type of System Is Best For You?

The type of system you choose will depend on your specific needs. If you have a large home with multiple water sources, a POE system is probably your best option. If you’re only concerned about the quality of your drinking water, a POU system will be sufficient.

What Are The Most Important Factors To Consider?

There are a lot of factors to consider when choosing a whole house water filtration system. However, we believe that the following factors are the most important:

Water quality

The first and most important factor to consider is the quality of your water. You need to have your water tested so that you know what contaminants are in it. Once you know what’s in your water, you can choose a system that will remove those contaminants.

Size of home:

The size of your home will determine the size and type of system you need. If you have a large home with multiple water sources, you’ll need a larger and more powerful system.

Water pressure:

Your water pressure will determine the flow rate of your filtration system. If you have low water pressure, you’ll need to choose a system with a lower flow rate.

Budget:

The cost of a whole house water filtration system can range from $500 to $5,000. You need to consider your budget when choosing a system.

The best way to figure out which whole house water filtration system is right for you is to have your water tested and then consult with a water treatment professional. They will be able to recommend a system that meets your specific needs.

In Closing

It’s important to note that a whole house water filtration system is a big investment. However, it’s an investment that will pay for itself many times over. Not only will you be improving the quality of your water, but you’ll also be extending the life of your home’s plumbing and appliances.